|
Monobloc 40
|
|
 |
|
| Product Category |
Central Vacuum System |
| Model Number |
Monobloc 40 |
| Description |
|
| Features |
- 48" diameter filter housing for low "can velocity", with radial
inlet and internal deflector to direct incoming materials into
collection hopper.
- Four (4) PTFE high efficiency filter cartridges rated 99.9%
efficient @ 1 micron particle size with 72 sq. ft. total filter
area. Accessible for maintenance or inspection from two convenient
hinged side access doors with captive hardware.
- Continuous pulse filter cleaning with adjustable timing. Each
cartridge is pulsed individually in a sequence, for maximum cleaning
efficiency, which continues while the vacuum is operating. Includes
two off-line cleaning cycles when vacuum is shut-down.
- NEMA 4 control panel enclosure with master power disconnect,
magnetic motor starter with thermal overload protection, micro-PLC
controller for pulse filter cleaning and high level probe. Includes
Illuminated "Start" pushbutton and mushroom-type e-stop pushbutton.
- Continuous-duty vacuum producer: positive-displacement (rotary-lobe)
vacuum pump, low-speed operation for long service life and low
noise levels. Airflow remains constant despite variations in demand
in vacuum system. Pump is belt-driven by a TEFC continuous-duty
motor, 1750 RPM, with adjustable base. Includes OSHA-approved
belt guard and exhaust silencer.
- Secondary safety filter located ahead of vacuum pump, removable
without tools.
- Vacuum relief valve and liquid-filled vacuum gauge.
- Collection container: 2 cu.yd (50+ cubic ft.) capacity, self-dump
style, reinforced for 16" Hg (220" H2O) vacuum.
- 5000 lb. capacity pallet jack for raising and lowering the collection
container. A large gasketed discharge plenum allows for misalignment
of the hopper.
- No-Flow Valve Assembly: allows vacuum system to operate continuously,
even when all inlets may be closed. Includes NEMA 4 control panel
with high and low vacuum switches, automatic pneumatic valve with
pressure regulator / gauge package. Mounted on inlet to vacuum
producer, requires 110v / 1-ph electricity and 1/4" compressed
air supply. Includes adjustable slide valve on air intake to allow
fine adjustment based on pressure drop in tubing network.
- High-level probe, radio-frequency type, with adjustable sensitivity,
includes automatic vacuum shut-down and indicator light on control
panel.
- Carbon steel construction with blue epoxy finish
|
|
| Technical Data: |
| Suction Power (maximum) |
1,000 CFM @ 12" Hg (162"
H20) |
| Suction Connections |
1 @ 6" tube shank |
| Motor |
40 HP TEFC, 1750 RPM,
standard efficiency |
| Voltage |
230V or 460V./ 3-phase,
60 Hz |
| Capacity of Container |
2.0 cu. yd. |
| Dimensions |
91"L x 67"W x 115"H |
|
