STANDARD EQUIPMENT:       

• Tangential inlet with internal cone for maximum separation of incoming powders.
• Four (4) cartridge filters, total 100 square feet of filter area, PTFE high efficiency filter media rated 99.9% efficient at 1 micron. Each cartridge is pulsed individually in a sequence, for maximum cleaning efficiency, which continues as long as the vacuum is running. Includes two complete off-line cleaning cycles when vacuum is shut-down.         Secondary cartridge filter located ahead of the vacuum pump
• NEMA 4 control panel with master power disconnect, magnetic motor starter with thermal overload protection, micro-PLC controller for pulse filter cleaning and optional high level probe. Includes Illuminated "Start" pushbutton and mushroom-type emergency stop button, and 1/4" compressed air regulator / gauge / filter assembly.
• Continuous-duty vacuum producer: direct-drive, oil-free regenerative exhauster, cast aluminum impeller and housing, TEFC, 3600 RPM
• Vacuum relief valve with silencer and vacuum gauge
• Flexible electrical cord, 3 conductor, (with out plug) x 25' long
• Removable collection container (standard 55-gallon steel drum) on a heavy-duty drum dolly with (4) 4" swivel casters
• Heavy-duty mechanical lifting and lower device for collection container
• Sound proofing for noise levels of less than 90 dbA @ 10 ft.  
• Heavy-duty frame assembly with (2) 14" diameter wheels and (1) 6" diameter dual swivel castor with towbar handle. 
• Carbon steel construction with blue powder coat finish